2M Maroc, also known as the Second Channel or 2M Monde, is a leading Moroccan public television channel, established in 1989 by the Société Nationale de Radiodiffusion et de Télévision (SNRT).
Based in Casablanca, 2M offers a vibrant mix of news, entertainment, sports, and cultural programs, appealing to Moroccans and the diaspora worldwide.
As a free-to-air channel broadcasting in Arabic, French, and Berber, it showcases Morocco’s diverse identity through popular dramas, talk shows, and live events.
This guide provides the latest frequencies for 2M Maroc on satellites as of June 2025, a step-by-step receiver setup process, expert tips for a strong signal, and highlights of its dynamic content, ensuring you can tune in seamlessly from Casablanca to Europe.
Why Choose 2M Maroc?
2M Maroc is Morocco’s most-watched channel, boasting a 35.4% audience share in 2018, far surpassing Al Aoula’s 9.2%.
Its engaging content includes dubbed international series, Moroccan dramas like L’Couple, and live sports coverage, such as Botola Pro matches.
The channel’s free-to-air status ensures accessibility, with HD broadcasts delivering crisp visuals. Available via live streaming on www.2m.ma and active on YouTube and Facebook, 2M connects Moroccans globally, offering a blend of modernity and tradition that resonates with families and youth alike.
2M Maroc Satellite Frequencies
To watch 2M Maroc, you need precise frequency, polarization, symbol rate, and FEC (Forward Error Correction) settings for your satellite receiver. The table below lists the latest frequencies for 2M Maroc on key satellites as of June 2025, sourced from reliable platforms like www.2m.ma, www.lyngsat.com, and www.altkia.com. As a free-to-air channel, no decryption is required. Always verify frequencies with these sources, as transponder settings may shift.
|
Satellite |
Frequency |
Polarization |
Symbol Rate |
FEC |
Coverage |
Details |
|---|---|---|---|---|---|---|
|
Nilesat 201/Eutelsat 7 West A (7.0° W) |
12015 MHz |
Vertical (V) |
27500 kS/s |
3/4 |
Middle East, North Africa |
SD/HD, DVB-S2, strong signal in Morocco, Algeria, Tunisia. Named 2M TV. |
|
Hot Bird 13E (13.0° E) |
10873 MHz |
Vertical (V) |
27500 kS/s |
3/4 |
Europe, parts of North Africa |
SD, DVB-S, ideal for diaspora in France, Italy. Named 2M Monde. |
|
Badr 4 (26.0° E) |
12683 MHz |
Vertical (V) |
27500 kS/s |
3/4 |
Middle East, North Africa |
SD, DVB-S, reliable in Morocco, Egypt, Jordan. Named 2M NAT. |
|
Eutelsat 21B (21.6° E) |
11567 MHz |
Horizontal (H) |
30000 kS/s |
2/3 |
Middle East, North Africa |
HD, DVB-S2, strong in Morocco, Libya. Named 2M NATIONAL. |
Key Information
-
Satellite Coverage: 2M Maroc is available on Nilesat, Hot Bird, Badr 4, and Eutelsat 21B. No confirmed frequencies exist for Yahsat (52.5° East) or Es’hailSat (25.5° East) as of June 2025.
-
Frequency Accuracy: Avoid outdated frequencies like 11476 MHz (Vertical) on Nilesat, which may no longer be active for 2M. The table above provides the most reliable settings.
-
Global Access: Signals may weaken outside MENA and Europe, such as in Asia or the Americas. Stream live on www.2m.ma or YouTube for worldwide viewing.
-
Free-to-Air Status: 2M Maroc is unencrypted, requiring no subscription, ensuring accessibility within satellite footprints.
Tips for a Strong Signal
To enjoy 2M Maroc’s programs with a robust and clear signal, follow these expert tips for satellite reception:
-
Dish Size: Use a 60-80 cm dish for Nilesat, Hot Bird, and Badr 4 in MENA and Europe (e.g., Rabat, Paris). For Eutelsat 21B, a 70-90 cm dish is ideal. In fringe areas (e.g., northern Europe for Nilesat), a 90-120 cm dish boosts signal strength.
-
Accurate Dish Alignment: Point your dish to Nilesat (7.0° W), Hot Bird (13.0° E), Badr 4 (26.0° E), or Eutelsat 21B (21.6° E) using a satellite finder or app like DishPointer or SatFinder. Ensure a clear line of sight free of obstructions.
-
LNB Selection: Install a Universal Ku-band LNB with 9.75 GHz (low band) and 10.6 GHz (high band) frequencies. Ensure DVB-S2 compatibility for HD broadcasts on Nilesat and Eutelsat 21B.
-
Signal Quality: Target 70% or higher signal quality (98% is optimal) on your receiver’s signal meter to prevent pixelation. Fine-tune LNB skew for best performance.
-
Weather Protection: Ku-band signals can weaken during heavy rain. Secure your dish against wind and check LNB caps for water damage to maintain signal stability.
-
Coverage Verification: Confirm your location is within the satellite’s beam using coverage maps on www.dishpointer.com or www.satbeams.com.
Tuning 2M Maroc on Your Receiver
Adding 2M Maroc to your satellite receiver is quick and easy with these steps, designed for most receivers (e.g., Strong, Humax, Technisat), though menu names may vary slightly.
-
Enter the Setup Menu:
-
Press “Menu” or “Settings” on your remote.
-
Navigate to “Installation,” “Channel Search,” or “Antenna Setup.”
-
-
Select Manual Scan:
-
Choose “Manual Scan,” “Manual Installation,” or “Add Transponder.”
-
Select “Add TP” or “Edit Transponder” if prompted.
-
-
Choose Your Satellite:
-
Select Nilesat (7.0° W), Hot Bird 13E (13.0° E), Badr 4 (26.0° E), or Eutelsat 21B (21.6° E) from the satellite list.
-
If not listed, manually enter the orbital position.
-
-
Input Transponder Settings:
-
Refer to the frequency table above and enter the settings for your chosen satellite (e.g., 12015 MHz, Vertical, 27500 kS/s, 3/4 for Nilesat).
-
Confirm all values are correct.
-
-
Start the Scan:
-
Press “Scan,” “Search,” or “OK” to initiate the scan.
-
Select “FTA Only” or “All Channels” to include free-to-air channels.
-
Wait 1-3 minutes for the scan to complete.
-
-
Save Channels:
-
Press “Save” or “OK” to store the scanned channels.
-
2M Maroc will appear as “2M TV,” “2M Monde,” “2M NAT,” or “2M NATIONAL” in your channel list, depending on the satellite.
-
-
Fine-Tune for Strong Signal:
-
If the signal is weak or the channel is missing, adjust the dish’s azimuth and elevation while monitoring the signal meter.
-
Check LNB skew and cables for 70-98% signal strength.
-
-
Test the Broadcast:
-
Locate 2M Maroc in your channel list and select it to ensure clear playback.
-
If issues persist, recheck settings or consult a professional installer.
-
Receiver Tips:
-
For Strong receivers (e.g., SRT 4920), enable “LNB Power” in the “Transponder” menu.
-
For Humax or Technisat, set LNB to “Universal” (9750/10600 MHz).
-
Default PINs (e.g., 0000, 1234) may be required; refer to your manual.
2M Maroc’s Diverse Programming
2M Maroc offers a rich lineup that blends entertainment, culture, and information, appealing to a broad audience. Key highlights include:
Top Programs
-
L’Couple: A beloved Moroccan comedy-drama series exploring family dynamics.
-
Moubasharatan Maakoum: A talk show addressing social and political issues with lively debates.
-
Sports Coverage: Live broadcasts of Botola Pro football matches and international tournaments.
-
MasterChef Maroc: A popular cooking competition showcasing Moroccan culinary talent.
-
Dubbed Series: Exclusive international dramas, such as Turkish series, dubbed in Moroccan Arabic.
Content divisions
-
News: Timely updates on Moroccan and global events in Arabic and French.
-
Sports: Live football matches and sports analysis, especially during major events.
-
Entertainment: Moroccan and international dramas, comedies, and music shows.
-
Cultural: Programs celebrating Moroccan heritage, arts, and Berber culture.
-
Social: Talk shows and documentaries addressing community issues and youth interests.
Strategies to Improve Satellite Channel Reception
Ensuring strong and stable satellite reception requires proper alignment, high-quality equipment, and regular maintenance. Following the right strategies can significantly enhance your viewing experience and reduce interruptions.
1. Optimize Dish Alignment
- Ensure the dish is precisely pointed to the satellite’s azimuth and elevation.
- Use signal strength and quality indicators on your receiver to fine-tune alignment.
- Make small adjustments slowly to achieve the highest stable signal.
2. Adjust LNB Skew Angle
- Rotate the LNB slightly to match the satellite’s polarization.
- Proper skew adjustment reduces interference and improves signal quality.
- Check manufacturer recommendations for your satellite and location.
3. Use High-Quality LNBs and Cables
- Low-noise LNBs provide better signal reception, especially for weak satellites.
- Use well-shielded coaxial cables to prevent interference and signal loss.
- Replace old or damaged cables promptly.
4. Keep Equipment Clean and Maintained
- Remove dust, leaves, or snow from the dish surface regularly.
- Check for loose connections and tighten F-connectors as needed.
- Inspect for rust or physical damage and repair when necessary.
5. Avoid Obstacles and Interference
- Ensure there are no trees, buildings, or other obstructions blocking the line of sight to the satellite.
- Avoid placing the dish near devices that may cause electromagnetic interference.
- Choose an elevated location if possible to maximize signal reception.
6. Regularly Monitor and Update Settings
- Check signal indicators periodically to detect any drop in quality.
- Update transponder lists and receiver firmware to maintain optimal performance.
- Re-scan channels if you notice missing or weak channels.
Implementing these strategies ensures a strong, clear, and reliable satellite signal, providing uninterrupted access to your favorite channels and high-quality viewing experience.
Setting Your Receiver to Automatically Follow New Channels
Modern satellite receivers allow automatic updates of the channel list without manually scanning each frequency. This ensures you always access new channels and maintain a complete, organized lineup.
1. Enable Auto-Update Features
- Go to your receiver’s Settings or System menu.
- Look for options like Auto Channel Update, Network Scan, or Channel Refresh.
- Turn on the feature to allow the receiver to check for new channels automatically at scheduled times.
2. Connect to the Satellite or Network
- Some receivers require connection to the satellite network or an internet feed for automatic updates.
- Ensure your receiver is online if the feature relies on network-based updates.
3. Schedule Update Times
- Set the update to occur at convenient times, such as overnight, to avoid interrupting viewing.
- Choose daily, weekly, or event-based update intervals if available.
4. Keep Receiver Firmware Updated
- Maintain the latest firmware to support automatic channel updates.
- Check manufacturer notifications to ensure compatibility with the latest transponder changes.
5. Verify Updated Channels
- After auto-update, review your channel list to ensure new channels are added correctly.
- Organize favorites and remove duplicates or inactive channels if necessary.
Enabling automatic channel updates saves time, ensures you never miss newly launched channels, and keeps your receiver’s lineup complete and organized without manual effort.
Strategies to Improve Satellite Channel Reception
Ensuring strong and stable satellite reception requires proper alignment, high-quality equipment, and regular maintenance. Following the right strategies can significantly enhance your viewing experience and reduce interruptions.
1. Optimize Dish Alignment
- Ensure the dish is precisely pointed to the satellite’s azimuth and elevation.
- Use signal strength and quality indicators on your receiver to fine-tune alignment.
- Make small adjustments slowly to achieve the highest stable signal.
2. Adjust LNB Skew Angle
- Rotate the LNB slightly to match the satellite’s polarization.
- Proper skew adjustment reduces interference and improves signal quality.
- Check manufacturer recommendations for your satellite and location.
3. Use High-Quality LNBs and Cables
- Low-noise LNBs provide better signal reception, especially for weak satellites.
- Use well-shielded coaxial cables to prevent interference and signal loss.
- Replace old or damaged cables promptly.
4. Keep Equipment Clean and Maintained
- Remove dust, leaves, or snow from the dish surface regularly.
- Check for loose connections and tighten F-connectors as needed.
- Inspect for rust or physical damage and repair when necessary.
5. Avoid Obstacles and Interference
- Ensure there are no trees, buildings, or other obstructions blocking the line of sight to the satellite.
- Avoid placing the dish near devices that may cause electromagnetic interference.
- Choose an elevated location if possible to maximize signal reception.
6. Regularly Monitor and Update Settings
- Check signal indicators periodically to detect any drop in quality.
- Update transponder lists and receiver firmware to maintain optimal performance.
- Re-scan channels if you notice missing or weak channels.
Implementing these strategies ensures a strong, clear, and reliable satellite signal, providing uninterrupted access to your favorite channels and high-quality viewing experience.
How Satellites Enable Global Live Sports Broadcasting
Satellite technology is the backbone of global live sports broadcasting. It allows major sporting events—such as the
FIFA World Cup and the Olympic Games—to be transmitted in real time to millions of viewers across continents with high reliability and quality.
1. Capturing the Live Event
- Multiple professional cameras capture the action from different angles inside the stadium.
- Audio commentary, instant replays, and on-screen graphics are added in a production control room.
- The final video feed is encoded into a compressed digital format suitable for satellite transmission.
2. Uplink Transmission to the Satellite
- The encoded broadcast signal is sent from a ground station (uplink facility) to a geostationary satellite in orbit.
- The satellite receives, amplifies, and shifts the frequency of the signal.
- High-powered transponders ensure wide and stable coverage over large regions.
3. Downlink Distribution to Broadcasters and Viewers
- The satellite retransmits the signal back to Earth across its coverage footprint.
- TV networks receive the signal at their ground stations for redistribution via cable, terrestrial, or IPTV systems.
- Home satellite dishes receive the signal directly for live viewing.
4. Maintaining High Quality and Low Latency
- Advanced standards such as DVB-S2 and HEVC compression allow HD and 4K broadcasts with efficient bandwidth usage.
- Redundant satellite links prevent interruptions during critical live moments.
- Hybrid systems combine satellite and fiber networks to minimize broadcast delay.
5. Why Satellites Are Essential for Live Sports
- Global reach without relying on local infrastructure.
- Simultaneous transmission to multiple countries and languages.
- Reliable performance even in remote or disaster-affected areas.
In summary, satellites make worldwide live sports coverage possible by rapidly transmitting high-quality video signals from stadiums to broadcasters and viewers everywhere, ensuring fans never miss a single moment of the action.
Understanding the Difference Between Arabic and International Satellites
Satellite broadcasting varies depending on whether the satellite is regional (Arabic) or international. Understanding these differences helps viewers choose the right satellites for their preferred channels and optimize reception quality.
1. Coverage Area
- Arabic Satellites: Primarily cover the Middle East and North Africa, offering regional channels and content.
- International Satellites: Provide global coverage, including Europe, Asia, and the Americas.
- Coverage maps (footprints) determine which regions receive strong signals from each satellite.
2. Channel Content
- Arabic satellites focus on local news, entertainment, and regional sports channels.
- International satellites broadcast a variety of content including global news, movies, sports, and multicultural programming.
- Language and regional restrictions may affect channel availability.
3. Transponder and Frequency Management
- Arabic satellites often have transponders dedicated to specific regional broadcasters.
- International satellites manage multiple regions and languages, sometimes offering more transponders per satellite.
- Frequency and polarization must be correctly selected for clear reception.
4. Accessibility and Subscription
- Many Arabic channels are free-to-air, allowing access without subscriptions.
- International satellites may have encrypted channels requiring paid subscriptions.
- Some international sports or movie channels require regional decoders or smart cards.
5. Choosing the Right Satellite
- Decide based on your preferred content, language, and geographic location.
- Consider combining Arabic and international satellites for a wider range of channels.
- Use satellite tracking tools to ensure optimal dish alignment and reception quality.
Understanding the differences between Arabic and international satellites helps viewers select the best satellites for their needs, ensuring access to desired channels with optimal signal quality.
How to Protect Your Satellite Receiver from Data Loss
Satellite receivers store important information such as channel lists, favorites, and settings. Protecting this data ensures uninterrupted viewing and saves time that would otherwise be spent on reconfiguring the receiver.
1. Regularly Backup Your Channel List
- Use a USB flash drive to export channel lists and receiver settings.
- Perform backups after adding new channels or changing settings.
- Keep multiple backup copies in case one file becomes corrupted.
2. Update Firmware Carefully
- Only install official firmware updates from your receiver manufacturer.
- Ensure the power supply is stable during firmware installation to avoid data corruption.
- Restart the receiver after updates and verify that your channels and settings remain intact.
3. Avoid Power Interruptions
- Use a surge protector or UPS to prevent sudden power outages.
- Do not unplug the receiver while it is saving settings or performing updates.
4. Handle USB Devices Carefully
- Safely remove USB drives after backups to prevent corruption.
- Use quality USB drives formatted in FAT32 or exFAT for compatibility.
5. Restore Data When Needed
- Keep instructions ready for restoring channel lists and settings from backups.
- After restoration, verify that all channels, favorites, and custom settings are working correctly.
By following these precautions, you can protect your receiver from accidental data loss, ensure stable channel reception, and maintain your personalized viewing experience.
How to Restore Channels After a Factory Reset
Performing a factory reset on your satellite receiver erases all saved channels, favorites, and settings. Restoring your channels correctly ensures you can continue enjoying your favorite content without starting from scratch.
1. Backup Before Reset
- If possible, always create a backup of your channel list and settings before performing a factory reset.
- Use a USB flash drive or the receiver’s built-in backup feature.
- Store the backup file safely to prevent corruption or loss.
2. Perform the Factory Reset
- Access the Settings or System menu on your receiver.
- Select Factory Reset or Restore Default Settings.
- Confirm the action and wait until the reset is complete.
3. Restore Channels from Backup
- Connect your USB drive with the backup file to the receiver.
- Use the Restore or Import Channels option in the menu.
- Verify that all channels, favorites, and settings have been restored correctly.
4. Manual Channel Scan (If Backup Is Unavailable)
- Use the Auto Scan or Network Scan feature to search for available channels.
- For specific channels, perform a manual scan using the frequency, polarization, and symbol rate.
- Save the channels after scanning and organize your favorites as needed.
5. Verify Signal and Settings
- Check the signal strength and quality for each restored channel.
- Adjust dish alignment or LNB skew if necessary to improve reception.
- Ensure parental controls and other custom settings are reapplied.
By following these steps, you can quickly restore your channels after a factory reset, minimizing downtime and ensuring a seamless viewing experience.
How to Protect Your Satellite Receiver from Data Loss
Satellite receivers store important information such as channel lists, favorites, and settings. Protecting this data ensures uninterrupted viewing and saves time that would otherwise be spent on reconfiguring the receiver.
1. Regularly Backup Your Channel List
- Use a USB flash drive to export channel lists and receiver settings.
- Perform backups after adding new channels or changing settings.
- Keep multiple backup copies in case one file becomes corrupted.
2. Update Firmware Carefully
- Only install official firmware updates from your receiver manufacturer.
- Ensure the power supply is stable during firmware installation to avoid data corruption.
- Restart the receiver after updates and verify that your channels and settings remain intact.
3. Avoid Power Interruptions
- Use a surge protector or UPS to prevent sudden power outages.
- Do not unplug the receiver while it is saving settings or performing updates.
4. Handle USB Devices Carefully
- Safely remove USB drives after backups to prevent corruption.
- Use quality USB drives formatted in FAT32 or exFAT for compatibility.
5. Restore Data When Needed
- Keep instructions ready for restoring channel lists and settings from backups.
- After restoration, verify that all channels, favorites, and custom settings are working correctly.
By following these precautions, you can protect your receiver from accidental data loss, ensure stable channel reception, and maintain your personalized viewing experience.
Your website is my first choice whenever a channel changes its frequency. Very reliable source.